How to Care for Your Custom Glassware

Avoid harsh abrasives and strong chemicals when cleaning your custom glassware. Hand washing with mild dish soap and warm water is best. Use a soft sponge or cloth to gently remove residue without scratching the glass surface or etching designs.

After washing, rinse thoroughly to clear away any soap film which can dull the finish if left to dry on its own.

Dry glassware immediately with a lint-free, soft towel to prevent water spots and preserve clarity.

• Use lukewarm water, not hot, to avoid thermal shock
• Do not use bleach or ammonia-based cleaners
• Avoid scouring pads or rough sponges

Although some glassware is labeled dishwasher safe, personalized glass items often benefit from hand washing to protect the custom design.

If you do use a dishwasher, place glassware securely to prevent clinking and potential chipping.

Use a gentle cycle, avoid high heat drying, and use a mild detergent formulated for delicate dishware.

• Place glasses on upper rack only
• Use a protective rack or soft liners
• Skip the heated drying cycle to preserve etching or printing

Handle your custom glassware by the base or thicker parts rather than rims to minimize stress and prevent damage.

Store glassware upright and avoid stacking when possible to prevent scratches and pressure breaks.

Use protective padding or separators if stacking is unavoidable, especially for fragile or engraved pieces.

• Store in a clean, dry cabinet away from direct sunlight
• Avoid sudden temperature changes while handling

Glassware can crack or shatter from rapid temperature shifts. Avoid pouring boiling liquids directly into cold glasses or placing cold glasses into hot water.

Do not use custom glassware for harsh or chemical-based beverages to prevent etching or discoloration.

Inspect regularly for chips or cracks; damaged glassware should be retired from daily use for safety.

• Do not microwave etched or printed glassware
• Avoid using metal utensils inside the glasses

Over time, glassware can develop a cloudy appearance from mineral deposits or soap residue.

To restore clarity, soak glasses in a mixture of white vinegar and water for 15-30 minutes, then rinse and dry thoroughly.

For stubborn stains, a paste of baking soda and water can gently polish the surface without harming custom designs.

• Do not scrub vigorously after applying paste
• Thoroughly rinse to avoid residue